CONTACT
Scan qr code
CONTACT
ABOUT
Model of double wall bellows production line
Double wall bellows production line accessories
PRODUCT
NEWS
Copyright © 2020 SUBA Machinery All Rights Reserved. Py:www.300.cn 鲁ICP备10202133号
Tianqiaosong, Economic Development Zone, Qingzhou, Shandong, China.
Tel：+86-0536-2139218 / +86-13375369566
E-mail：zy@subamachinery.com
PRODUCTS
03
01
02
04
05
06
Die head
Suba die head short flow channel design (reduced by 25%) achieves low temperature and low pressure extrusion.
Optimized design of Suba double layer die head, inner and outer wall thickness and wall deviation adjustment is very stable and convenient.
Product advantage of bellows production line
Focus, focus, and professionalism let the power of the brand help you succeed
Mould
The optimized cooling cavity wall ensures the maximum cooling cross-sectional area, so that the cooling water has enough contact surface with the moulds, and the cooling efficiency is high.
Stacker
Electric height adjustment reduces artificial fatigue.
The stacker is equipped with weighing system.
Turn over the pipe automatically.
Cutter
Double blades cutting process to remove waste pipe, ensure seamless connection of pipe;
The precise trigger device ensures continuously precision cutting;
Equipped with dual hydraulic system, symmetrical center, smooth operation
Extruder
The extruders use buffer forced feeding section, the power consumption of the main drive motors is reduced by about 30%;
The flow channel section of the extruder is optimized to ensure the production of pipe at low temperature and low pressure
Corrugator
The patented closed loop direct water recycled cooling system, changing moulds no need to disassemble water tubes;
No platform design, different specifications of the moulds have same center height;
Patented drag chain design reduces equipment impact and improves service life of equipment
Suba machinery main products: horizontal structure water cooling small size OD40mm – 180mm, ID90mm – 300mm corrugated pipe extrusion line, middle size ID90mm – 600mm and bigger size corrugated pipe extrusion line.
Corrugated pipe has many advantages compared with similar pipes due to its material HDPE/PP and special pipe profile.
Product advantages
High production speed
Pipe is with less weight and machine is with closed loop water cooling system, thus achieves high production speed;
Joint convenient
Two corrugated pipes can be easily joint by rubber ring;
Material advantage
PE or PP both ok; Virgin and recycled high density polyethylene can be both used depending on different usage;
High ring stiffness
Due to the structure of corrugated pipe, it has a higher ring stiffness than smooth pipes at the same weight;
Widely used
Double wall corrugated pipes are widely used for drainage, sewage, cable prodtection, water collection and etc.
Good pipe scope
From OD40mm to ID1500mm corrugated pipe production for different application.
Easy handling
With less weight, corrugated pipes are much easier for handling, and no need heavy equipment to install which achieves an easy installation;
Less weight
Double wall corrugated pipe saves material compared to HDPE pipes at same diameter and same ring stiffness;
High flexibility
Double layer corrugated pipe has a deflection of up to 30%;
Good water flow
With smooth inside layer, double wall corrugated pipes ensures a good water flow;